无码不卡A级毛片-在线观看精品91福利-亚洲aV美女天堂一区二区三区-国产在线视频2022-国产黄色一级视频片-成人国产精品高清在线观看-亚洲av第二区国产-国产欧美综合精品一区二区三区

2024

2024

  • Record 349 of

    Title:Design of Optical-mechanical System of Catadioptric Aerial Mapping Camera Based on Secondary Mirror Image Motion Compensation
    Author Full Names:Zhang, Hongwei(1); Qu, Rui(1); Chen, Weining(1); Yang, Hongtao(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Aerial surveying and mapping is an important technical means of civil/military surveying and mapping,which can quickly obtain large-scale and high-precision scale mapping of the target area in a short period of time,and accurately obtain coordinate information of the target plane and elevation information on the map. The acquired information plays an important supporting role in digital city construction,land resources survey,military strategic planning,etc. With the development of aerial surveying and mapping technology,the requirements for aerial mapping cameras have been further improved. It is required that aerial mapping cameras can achieve wide width,high precision and large scale mapping. In order to meet the above requirements,the aerial mapping camera adopts scan imaging mode,but this imaging mechanism will introduce forward/scan image motion,which will affect the image quality. In order to satisfy the image stabilization accuracy of the aerial mapping camera,it is necessary to compensate the image motions. Therefore,a catadioptric aerial mapping camera based on secondary mirror image motion compensation is designed in this paper. Aiming at the dynamic image motion problem of the aerial mapping camera in the process of ground swing imaging,the vector aberration theory for a two-mirror telescopic systems is adopted. The secondary mirror is used as the image motion compensation element, and the comprehensive image motion compensation of the aerial mapping camera is realized through the secondary mirror multi-dimensional motion. However,in the process of compensating the image motion,the secondary mirror will be eccentric and inclined,which will cause the secondary mirror to be off-axis and affect the image quality. Therefore,a misalignment optical system model is established to study the relationship between the deviation vector of the secondary mirror field and the misalignment of the secondary mirror field,and the influence of the secondary mirror motion on the image quality is analyzed. Meanwhile,a design example of the optical-mechanical system of the catadioptric aerial mapping camera based on the secondary mirror image motion compensation is given. The effective focal length of the optical system is 450 mm,and the working spectrum is 435~900 nm. The field of view of the optical system is 4.17×3.13,and the F-number is 4.2. In the design process,the optical-mechanical system of aerial mapping camera adopts non-thermal design to adapt to the working environment of ?40 ℃~60 ℃. In order to verify the image motion compensation ability of multi-dimensional motion of the optical element,an experimental platform is built to conduct laboratory imaging tests and field imaging tests on the aerial mapping camera. The laboratory imaging test results show that the dynamic resolution of the aerial mapping camera using the image motion compensation technology can reach 74 lp/mm,and the image motion compensation accuracy is better than 0.5 pixels,which meets the design expectation. In addition,the field imaging test results show that compared with disable image motion compensation function,the aerial survey camera with enable image motion compensation function can acquire sharp edges,clear images,and image quality can meet the expected requirements. Therefore,the camera has the advantages of high accuracy of image motion compensation,compact volume and high reliability,which lays a theoretical foundation for the direction of light and small,high precision and large scale mapping. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Aircraft Optical Imaging and Monitoring and Measurement Technology Laboratory, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China
    Publication Year:2024
    Volume:53
    Issue:2
    Article Number:0222001
    DOI Link:10.3788/gzxb20245302.0222001
    數據庫ID(收錄號):20240715561717
  • Record 350 of

    Title:Optimization Design of Large Aperture Curved Prism Bonding Based on Finite Element Analysis
    Author Full Names:Feng, Jun(1,2); Li, Siyuan(1); Wang, Feicheng(1,2); Chen, Wencong(1,2); Tian, Feifei(1,2); Jia, Xinyin(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Aiming at the working conditions and performance requirements of large-diameter curved prisms with high face shape precision,an optimized design approach is proposed for bonding such prisms while considering the adhesive curing shrinkage stress. Based on this approach,the bonding process for large-diameter curved prisms is successfully optimized. Firstly,the finite element differential equation for the shrinkage stress during glue curing is derived based on the non-free curing model of the glue. Secondly,by applying the principles of support structure design and flexible structure design theory,a meticulously devised circular flexible bonding structure was created. The topology of the frame structure was optimized with flexibility as the primary objective while adhering to structural weight constraints,resulting in an impressive lightweight rate of 55.79%. Subsequently,a simulation and analysis model was developed to investigate the impact of adhesive curing shrinkage on mirror surface shape using the temperature loading method. The response surface model for the colloid parameters' equivalent gel contraction force was established,achieving a goodness of fit of 97.56%. It was found that the equivalent gel contraction force increased with the increase of colloid contraction rate and thickness. Additionally,the equivalent gel contraction force and the area of colloid spot exhibited different monotonous increasing and decreasing trends under varying gel contraction rates. The degree of influence of colloid contraction rate on the equivalent gel contraction force was found to be the largest,while the area of colloid spot had the least influence on the equivalent gel contraction force. The optimized parameters for the colloid were determined to be 9 mm×23 mm×0.1 mm. The study investigated the influence of adhesive type,gel parameters,and bonding quantity on the surface shape of curved prism components. The results obtained from the surface shape simulation analysis of curved prisms using three kinds of epoxy adhesives(3M-2216,Milbond,and GHJ-01)under the same conditions were compared in terms of relevant properties of adhesive materials. The influence of surface shapes before and after curing was also examined to compare the performance of the adhesives. It was determined that the 3M-2216 adhesive exhibited optimum performance among the three kinds of adhesives. With the increase in the number of bonds,the deformation value of the front and rear mirrors shows a trend of decreasing and then increasing. The maximum stress value shows a fluctuating downward trend,while the average stress value shows a trend of decreasing and then slowly increasing. When bonded with 6 glue dots,the deformation of the upper and lower dome positions can be precisely restrained,so that the maximum deformation is concentrated in the center of the mirror. The deformation value and stress value are smaller. In summary,an optimized solution for high face shape accuracy is obtained by choosing 3m-2216 epoxy adhesive,designing arc-shaped glue spots and their flexible bonding structure. Under these conditions,with 6 glue spots on each side and a homogeneous distribution of gluing,it was found that the PV value for face shape accuracy of the curved prism's front mirror face is 2.78 nm with an RMS value of 0.53 nm;for its back mirror face,it is 1.58 nm with an RMS value of 0.31 nm which is 98% lower than that of the initial structure. Compared to the initial structure,wavefront error caused by adhesive curing has been reduced by 98.89%. Additionally,environmental adaptability was analyzed using the finite element method: Z-direction self-weight significantly impacts curved prism assembly followed by X-direction;Y-direction has the least effect. The maximum deformation observed in the assembly is at its upper surface center(67.6 nm),while the maximum stress value(0.18 MPa)is found on the bonding surface of the bonding ring. For front mirror surface shape accuracy:X-direction self-weight plays a major influence with PV value being 16.3 nm and RMS value of 3.61 nm;whereas for rear mirror surface,Z-direction self-weight plays a dominant role with PV value of 29.3 nm and RMS value of 5.34 nm. The thermal deformation and thermal stress reach their maximum values when subjected to a uniform temperature rise of 4 ℃ on gel material. As the temperature gradient increases,both thermal deformation and thermal stress initially decrease before increasing again. Among different temperature gradients tested,a rise in temperature gradient by 3 ℃ shows minimal impact on curved prism assembly,which validates its structural design's rationality. After implementing an optimized gluing scheme,the face shape accuracy for curved prism mirrors is less than 0.059λ in terms of PV value,and less than 0.012λ in terms of RMS value. This proposed gluing optimization scheme considers shrinkage stress during the curing process,meeting high-precision optical system requirements. The findings from this study can serve as a reference for optimizing high-face shape precision gluing schemes and support structure designs for large-diameter curved prisms. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:53
    Issue:11
    Article Number:1122002
    DOI Link:10.3788/gzxb20245311.1122002
    數據庫ID(收錄號):20245117558554
  • Record 351 of

    Title:Fourier ptychographic reconstruction with denoising diffusion probabilistic models
    Author Full Names:Wu, Kai(1,2); Pan, An(1); Gao, Wei(1)
    Source Title:Optics and Laser Technology
    Language:English
    Document Type:Journal article (JA)
    Abstract:Fourier ptychographic microscopy (FPM) is a promising computational imaging technique that can bypass the diffraction limit of the objective lens and achieve high-resolution, wide field-of-view imaging. The FPM setups firstly capture a series of low-resolution (LR) intensity images by angle-varied illumination and then reconstruction algorithms recover the high-resolution (HR) complex-valued object from the LR measurements. The image acquisition process commonly introduces noise, ultimately leading to degradation in the quality of the reconstruction results. In this paper, we report a noise-robust Fourier ptychographic reconstruction method that generates the HR complex-valued object estimation using the image priors specified by denoising diffusion probabilistic models (DDPM). First, the initial estimation of the HR complex-valued object is matched with an intermediate state in the Markov chain defined by DDPM. Then, the noisy initial solution is iteratively updated to a high-quality reconstruction result in the reverse process of DDPM and gradient descent correction is incorporated to enforce data consistency with the LR measurements. The proposed method integrates DDPM specified image priors and gradient descent correction, achieving solutions with less noise-related artifacts and high fidelity for HR complex-valued object estimation in Fourier ptychographic reconstruction. We apply the proposed method on both synthetic and real captured data. The experimental results show that our method can efficiently suppress the impact of noise and improve reconstruction results quality. ? 2024 Elsevier Ltd
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:176
    Article Number:111016
    DOI Link:10.1016/j.optlastec.2024.111016
    數據庫ID(收錄號):20241715963426
  • Record 352 of

    Title:Temperature Measurement Method for Small Target Medium-Wave Infrared Spectral Radiation Based on Distance Correction
    Author Full Names:Li, Wen-Kai(1,2); Zhou, Liang(1); Liu, Zhao-Hui(1); Gui, Kai(1); Liu, Kai(1); Li, Zhi-Guo(1); Xie, Mei-Lin(1)
    Source Title:Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:For long-distance space targets moving at high speeds, temperature is one of the important parameters to characterize their working state and performance. Accurately obtaining the temperature of the target has an important reference value for judging its motion state and predicting its situation development. At present, the commonly used processing method of surface target or point target is no longer applicable to the measurement of the radiation characteristics of small targets. At the same time, spectral detection increases the distinguishable information of the target in the wavelength dimension, which can accurately obtain the distribution of the target energy with wavelength, providing a possibility for the inversion of the target temperature, and has great application potential. The slitless spectrometer can reduce the requirements for tracking and stabilization accuracy of space targets, has the characteristics of simple structure, high frame rate and fast response speed, and has high application value in astronomical observation and spacecraft observation. In this paper, we analyzed the spectral calibration model of target infrared radiation characteristic measurement and determined the main parameters in the linear response model of infrared detector pixels. In order to reduce the influence of imaging distance on temperature measurement accuracy, we proposed a target temperature inversion model based on distance correction. The improved temperature measurement accuracy meets the accuracy requirements in practical engineering applications and greatly affects infrared radiation spectrum temperature measurement. Certain guiding significance. ? 2024 Science Press. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:44
    Issue:4
    Start Page:1158-1164
    DOI Link:10.3964/j.issn.1000-0593(2024)04-1158-07
    數據庫ID(收錄號):20241515866101
  • Record 353 of

    Title:Laser Center Extraction Method of Circular Linear Structure Profile Measurement Based on Cluster Segmentation
    Author Full Names:Yan, Xingxu(1); Du, Hubing(1); Feng, Leijie(1); Li, Yanjie(1); Jia, Jinge(2); Zhang, Gaopeng(3)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:Hole parts, such as bearings, cylinders, hydraulic cylinders, and artillery body tubes, are important to the field of aviation, spaceflight, auto, machine tool and heavy equipment manufacture industry. However, the inspection of inner surface quality of this kind of parts, especially deep hole inner surface, remains a difficult problem in the manufacturing field. More specifically, the difficulty of inspection system mainly lies in two aspects:firstly, the workspace is narrow, making it difficult to effectively use the existing inspection technologies;secondly, due to the limitations of the non-open space of the inner surface, it is easy to form blind zone during the task of measurement. To satisfied with the increasing requirements of quality inspection in above fields, some scholars have applied the optical method into the measurement system of hole parts because of its advantage of high accuracy, high robustness, rapid speed, non-contact, and low cost. However, when measuring inner surface of hole parts, the optical method often presents the problem of a limited or occluded field of view for the characteristics of hole parts. Due to the problem of occlusion, the well-known fringe projection profilometry cannot projected the fringe pattern to the inner surface and the desired deformed fringe pattern cannot be captured by a camera accordingly. So, circular structured light 3D measurement technology has been extensively employed to inspect accuracy of the hole parts, which is an active vision measurement technology based on the laser triangulation principle. Many works have been done to enhance the performance of circular structured light technique. However, occlusions are problematic because the light source and camera are placed on the same side of the measured object in the exiting technique. Additionally, the technique may be disturbed by speckle noise when metal surface is measured. Consequently, for structured light measurement technology, it is necessary to develop an efficient preprocess method to eliminate the disturbance to the most extent because the performance of the technology largely depends on high quality images. But this problem remains unsolved so far to our knowledge. In the work, the circular linear structure profile measurement method is proposed to inspect the quality of internal surfaces of hole parts. In our method, the light source and the image sensor are arranged on either side of the object to be measured to get a clear view during data acquisition. However, the proposed circular structure profile measurement technique is seriously affected by the quality of the extraction of the center of the laser center when a metal surface is measured. Concerned that removing the image of the light source used in the setup and laser speckle effect is vital to center extraction of circular structured light, in this paper, a clustered segmentation-based center extraction method is developed. The process of our method is as follows:The maximum inter class variance(OTSU)method is firstly used to adaptively segment the captured laser image into two parts:background and target image;then, the clustering method is used to separate the laser light source image and the laser speckle in the captured laser image;finally, sub-pixel laser center extraction is realized with help of the well-known Steger algorithm. Both simulation and experiment validate the correctness of the proposed method. The experimental results show that the proposed method can well suppress the influence of the laser light source image and the laser speckle during the extraction of the center of the laser center when compared with the typical filtering methods, such as median filtering. In addition, the proposed method can fulfil the task of center extraction efficiently, stably, and reliably. Therefore, it provides an effective way of extraction of laser center for three-dimensional contour measurement of deep hole parts. In the future work, we will focus on the development of accurate calibration method to convert 2D light stripes information into 3D coordinate information. ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) School of Mechanical and Electrical Engineering, Xi'an University of Technology, Xi'an; 710021, China; (2) Xi'an Future Intelligent Manufacturing Digital Technology Co., Ltd., Xi'an; 710000, China; (3) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China
    Publication Year:2024
    Volume:53
    Issue:11
    Article Number:1112004
    DOI Link:10.3788/gzxb20245311.1112004
    數據庫ID(收錄號):20245117548489
  • Record 354 of

    Title:Blind deep-learning based preprocessing method for Fourier ptychographic microscopy
    Author Full Names:Wu, Kai(1,2); Pan, An(1); Sun, Zhonghan(1); Shi, Yinxia(1,2); Gao, Wei(1)
    Source Title:Optics and Laser Technology
    Language:English
    Document Type:Journal article (JA)
    Abstract:Fourier ptychographic microscopy (FPM) is a technique for tackling the trade-off between the resolution and the imaging field of view by combining the techniques from aperture synthesis and phase retrieval to estimate the complex object from a series of low-resolution intensity images captured under angle-varied illumination. The captured images are commonly corrupted by multiple noise, leading to the degradation of the reconstructed image quality. Typically speaking, the noise model and noise level of the experimental images are unknown, and the traditional image denoising methods have limited effect. In this paper we model the FPM forward imaging process corrupted by noise and divide the noise in the captured images into two parts: the signal-dependent part and the signal-independent part. Based on the noise model we propose a novel blind deep-learning based Fourier ptychographic microscopy preprocessing method, termed BDFP, for removing these two components of noise. First, from a portion of the captured low-resolution images, a set of blocks corresponding to the smooth area of the object are extracted to model signal-independent noise. Second, under the assumption that the signal-dependent noise follows a Poisson distribution, we add Poisson noise and signal-independent noise blocks to clean images to form a paired training dataset, which is then used for training a deep convolutional neural network (CNN) model to reduce both signal-dependent noise and signal-independent noise. The proposed blind preprocessing method, combining with typical FPM reconstruction algorithms, is tested on simulated data and experimental images. Experimental results show that our preprocessing method can significantly reduce the noise in the captured images and bring about effective improvements in reconstructed image quality. ? 2023 Elsevier Ltd
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:169
    Article Number:110140
    DOI Link:10.1016/j.optlastec.2023.110140
    數據庫ID(收錄號):20234014830596
  • Record 355 of

    Title:Dual Optical Target Recognition Method for Collimated Images Based on BLOB Region and Edge Feature Analysis
    Author Full Names:He, Wenxuan(1,2); Wang, Zhengzhou(1); Wei, Jitong(1); Wang, Li(1); Yi, Dongchi(1)
    Source Title:Guangzi Xuebao/Acta Photonica Sinica
    Language:Chinese
    Document Type:Journal article (JA)
    Abstract:In order to solve the problem that the collimated target recognition algorithm of optical path docking cannot distinguish the adhesive state of double targets,a new method of collimated image dual optical target recognition based on Binary Large Object(BLOB)region feature analysis is proposed. There are two optical targets in the optical alignment image,that is,the simulated optical target and the main laser target. In the initial beam control stage,the positions of the two optical targets are random and uncertain,and there is a possibility of the two optical targets sticking together,which causes great difficulties in beam control. Therefore,optical path alignment needs to solve the image recognition problem in two cases:1)In the initial beam control stage,when the main laser beam and the analog beam are just introduced,the adhesion recognition algorithm needs to be used to identify the adhesion state of the two optical targets. If the two optical targets are in the adhesion state,the two targets need to be completely separated by adjusting the 2D frame BM6XY motor;2) In the case of two optical targets completely separated,it is necessary to distinguish between the analog light target and main laser target in the two optical targets. Firstly,the binary image is processed by digital morphology to calculate the area,center Cxy,axis length lenxy and region Reginxy,of each BLOB region in the whole image. Secondly,the number of valid BLOB regions vblobcount is counted,and the distance between the two maximum connected domains dir is calculated. When vblobcount>1 and dir>100,the collimation image is the completely separated double target image,otherwise it is the adhered image. Then,for the completely separated dual-target image,the number of BLOBs located in the two largest BLOB regions with the center of each BLOB region is counted. The small number of candidate BLOB regions is the main laser target,and the large number of candidate BLOB regions is the analog light target. Finally,for the adhered image,when dir ? 2024 Chinese Optical Society. All rights reserved.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100039, China
    Publication Year:2024
    Volume:53
    Issue:2
    Article Number:0210001
    DOI Link:10.3788/gzxb20245302.0210001
    數據庫ID(收錄號):20240715561765
  • Record 356 of

    Title:A design of compact plasmonic lens consisting of high index dielectric gratings and metal nano-film
    Author Full Names:Jia, Sen(1); Wang, Xianhua(1); Zhou, Libing(2)
    Source Title:Optics Communications
    Language:English
    Document Type:Journal article (JA)
    Abstract:In this paper, a hybrid ultra-thin planar subwavelength focusing structure consisting of a high refractive index dielectric grating and a nano metal film was designed. The thickness of this structure is only 200 nm. Surface plasmon polaritons (SPPs) were excited from the nano metal film, propagated along the metal-air interface, and were then converted into a radiation field by the dielectric grating, forming a focused spot in free space. By adjusting the grating position and width parameters, the shape of the focused optical field could be controlled. The simulation results showed that, under 532 nm light irradiation, the lens could produce a 270 nm (full width at half-maximum, FWHM) spot size at a focal length of 2.46λ. Moreover, under the illumination of 633 nm and 780 nm light, the designed lenses were found to produce focal spot sizes of 304 nm (0.48λ) and 364 nm (0.47λ), respectively, which were smaller than the diffraction limit. The simplicity of this plasmonic lens design, coupled with its reduced thickness and minimal absorption loss, offered significant advantages in terms of cost-effectiveness and ease of fabrication. ? 2024 Elsevier B.V.
    Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) School of Physics and Information, Shaanxi University of Science and Technology, Xi'an; 710021, China
    Publication Year:2024
    Volume:570
    Article Number:130928
    DOI Link:10.1016/j.optcom.2024.130928
    數據庫ID(收錄號):20243216819587
  • Record 357 of

    Title:Tracking control of flexible link manipulator with joint space constraints
    Author Full Names:Jing, Feng(1,2); Ma, Caiwen(1,2); Cao, Yu(1); Xie, Meilin(1); Wang, Fan(1); Liu, Peng(1); Fan, Xiao(1)
    Source Title:Journal of Physics: Conference Series
    Language:English
    Document Type:Conference article (CA)
    Conference Title:2024 7th International Conference on Intelligent Manufacturing and Automation, IMA 2024
    Conference Date:January 12, 2024 - January 14, 2024
    Conference Location:Virtual, Online, China
    Abstract:A controller design with system uncertainties, external disturbances, and joint space constraints for a flexible link manipulator (FLM) is presented in this paper. To overcome the lumped disturbance and ensure that the joint space constraints are not violated, a finite-time extended state observer (ESO) and a barrier Lyapunov function are constructed. Using Lyapunov's theory, the error of the system is proved to be semi-globally ultimately uniformly bounded without violating the constraints. Finally, the rationality of the proposed methodology is verified by numerical simulation. ? Published under licence by IOP Publishing Ltd.
    Affiliations:(1) Xi'An Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China
    Publication Year:2024
    Volume:2787
    Issue:1
    Article Number:012043
    DOI Link:10.1088/1742-6596/2787/1/012043
    數據庫ID(收錄號):20242816660786
  • Record 358 of

    Title:Splitting rules of the channeled modulation polarization imaging technology for different polarization detection requirements
    Author Full Names:Zhang, Ning(1); Zhang, Yunyao(2); Li, Siyaun(1)
    Source Title:Proceedings of SPIE - The International Society for Optical Engineering
    Language:English
    Document Type:Conference article (CA)
    Conference Title:2024 Conference on Spectral Technology and Applications, CSTA 2024
    Conference Date:May 9, 2024 - May 11, 2024
    Conference Location:Dalian, China
    Conference Sponsor:Chinese Society for Optical Engineering
    Abstract:Channeled modulation polarization imaging technology can obtain full polarization information of targets through a single frame of image, with advantages such as compact, low cost, and without electric rotating accessories. It has important application value in remote sensing, biomedical, national defense, and so on. The key point of channeled modulation polarization imaging technology is to modulate the four Stokes parameters that characterize polarization to different carried frequencies through amplitude modulation, and then use the frequency domain to separate the four two-dimensional Stokes parameters. Different channels are intercepted by a bandpass filter and subjected to inverse Fourier transform, which can achieve four two-dimensional distribution pictures of the Stokes parameters. Interference is the core of this technology, which is achieved through birefringent crystals or spectroscopic interferometers. After splitting, interference occurs in the focal plane, generating carrier frequency. However, a serious problem has been troubling researchers in this field, which is how to design birefringent crystals to achieve amplitude modulation of Stokes parameters. The amplitude of the interference fringes of the beams needs to be divided corresponds one-to-one with the Stokes parameter after interference. The current spectroscopic design mainly relies on experience and luck, lacking unified standards, which will affect the efficiency of system design. To solve this problem, relying on the representation of the electric field vector of light, the mathematical expression of Stokes parameters and the corresponding relationship with the spectral results are analyzed in reverse. Then, based on the physical meaning of Stokes parameters, phase modulation is used to achieve the representation of certain parameters for the sum of light intensities and the representation of certain parameters for the difference in light intensities. Ultimately, a correspondence is formed between different spectroscopic results and the detected polarization parameters and proposed modulation criteria for channeled modulation by linking the physical meaning and mathematical model of Stokes parameters. On the one hand, this study is beneficial for the targeted design of channeled modulation polarization imaging technology in different application scenarios for different parameter detection requirements, and on the other hand, it can guide the design of optical systems for different spectral requirements in birefringent crystal design, making the design of this technology more standardized. ? 2024 SPIE.
    Affiliations:(1) Key Laboratory of Spectral Imaging Technology, Xi'an Institute of Optics and Precision Mechanics of Cas, Xi'an; 710119, China; (2) College of Information Science and Technology, Northwest University, Xi'an; 710126, China
    Publication Year:2024
    Volume:13283
    Article Number:1328325
    DOI Link:10.1117/12.3036652
    數據庫ID(收錄號):20245217584034
  • Record 359 of

    Title:Observation of Superoscillation Superlattices
    Author Full Names:Ma, Xin(1); Zhang, Hao(1); Wei, Wenjun(1); Tai, Yuping(1); Li, Xinzhong(1,2,3); Shen, Yijie(4,5)
    Source Title:arXiv
    Language:English
    Document Type:Preprint (PP)
    Abstract:Superoscillation (SO) wavefunctions, that locally oscillate much faster than its fastest Fourier component, in light waves have enhanced optical technologies beyond diffraction limits, but never been controlled into 2D periodic lattices. Here, we report the 2D superoscillation lattices (SOL) with controlled symmetries, where the local wavevector can be ~700 times larger than the global maximal wavevector (k0) in a localized region ~100 times smaller than the global minimal wavelength (λ0). We also demonstrate the superoscillation superlattices (SOSL) as twisted bilayer Moirépatterns of two SOL, akin to the magic angle tuning in advanced twistronics, we can continually tune the on-demand SO with local maximal wavevector in a range of 450k0–700k0 and with ~ λ0/100–λ0/1000. The twistronic SOSL will advance optical imaging and metrology into extreme higher-dimensional superresolution.MSC Codes 78 Copyright ? 2024, The Authors. All rights reserved.
    Affiliations:(1) School of Chemistry and Chemical Engineering, School of Physics and Engineering, Henan University of Science and Technology, Luoyang; 471023, China; (2) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'An; 710119, China; (3) Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal New Materials and Advanced Processing Technology, Luoyang; 471023, China; (4) Centre for Disruptive Photonic Technologies, School of Physical and Mathematical Sciences, The Photonics Institute, Nanyang Technological University, Singapore; 637371, Singapore; (5) School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore; 639798, Singapore
    Publication Year:2024
    DOI Link:10.48550/arXiv.2409.19565
    數據庫ID(收錄號):20240426023
  • Record 360 of

    Title:High Modulation Depth Terahertz Modulator Based on Side-polished Terahertz Fiber
    Author Full Names:Luo, Zhenyang(1); Tian, Ziping(1); Zhang, Zilong(1); Wei, Longxiang(1); Xie, Manyan(1); Chen, Bingyu(1); Wang, Xingfu(2); Peng, Gangding(3); Kong, Depeng(4); Wei, Yuming(5); Yang, Tiefeng(5); Lu, Huihui(5); Guan, Heyuan(5)
    Source Title:Journal of Lightwave Technology
    Language:English
    Document Type:Article in Press
    Abstract:High modulation depth fiber-based modulators working at terahertz (THz) wavelength are of paramount importance for the application of THz communication technology by taking advantages of the low loss, high interference resistance and strong adaptability THz fiber network. Here, we demonstrate a THz modulator based on side-polished THz fiber combined with GaAs film/Au-nanoparticles (Au-Nps). The Au-Nps and the remaining thickness of the side-polishing are careful designed to achieve target resonance wavelengths. The side-polishing region of fiber provides a flat platform for integrating nanostructures to enhanced light-material interactions which greatly enhances the modulation performance. The experimental results show that this new fiber modulator can achieve the THz wave amplitude modulation under a relatively low irradiation of an external 808 nm laser, with a tunable frequency range of 0.366-1.093 THz and a maximum modulation depth of 99.24%. Besides, resonance frequency can be adjusted by changing the remaining thickness of the device. Moreover, the area of this modulator is only 9 mm2 which can be easily integrated into THz systems. Therefore, we believe our work will contribute to the developments of high-performance fiber-based THz modulator for applications in THz communication system. ? 1983-2012 IEEE.
    Affiliations:(1) Jinan University, Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Department of Optoelectronic Engineering, Guangzhou; 510632, China; (2) South China Normal University, Guangdong Engineering Research Center of Optoelectronic Functional Materials and Devices, School of Semiconductor Science and Technology, Foshan; 528225, China; (3) University of New South Wales, School of Electrical Engineering and Telecommunications, Sydney; NSW; 2052, Australia; (4) Chinese Academy of Sciences, Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Shaanxi, Xi'an; 710119, China; (5) Jinan University, Key Laboratory of Optoelectronic Information, Sensing Technologies of Guangdong Higher Education Institutes, Guangzhou; 510632, China
    Publication Year:2024
    DOI Link:10.1109/JLT.2024.3509575
    數據庫ID(收錄號):20245017522377
91亚洲免费片| 欧美Va日本Va| 99资源人人| 五月婷婷综合在线视频小说| 超碰成人在线观看| 婷婷久久五月天| 人妻久久久久久久久久久| 色婷婷综合影院| 99久久久久| 蜜臀av无码久久久久久久久| 超碰自拍天堂| 亚洲激情五月天| 精品无码色欲AV| www...com黄在线观看| 色色色热热热| 六月色日韩| 婷婷丁香成人色综合| 丁香婷婷综合激情五月色| 99色婷婷| 久久码久久无清| 精品久久人妻| 天天骑天天操| 婷婷一本和五月丁香| 在线91日韩| 色色色热| 天堂中文在线资源| http://www.lingjunshare.com/| 天天综合色丁香| 夜夜干天天操| 日日夜夜狠狠| 就爱干 在线| 91 九色 入口| 色色亚洲| 狠狠干综合| 成年人99热| 超碰com| 精品久久99码| 久久99精品久久久久久三级| 色婷婷丁香五月天激情综合网| 91九色国产熟女| 午夜精品久久久久久久爽| 五月天亚洲综合网| 久久99久久99精品免观看软件| 久久婷婷婷| 97色婷婷| 国产肥白大熟妇BBBB视频| 婷婷噜噜| 色播五月丁香婷婷| 色婷婷电影网| 大香蕉伊在| 少妇性BBB搡BBB爽爽爽视頻| 超碰免费人妻| 91午夜激情| 热久久77777| 91色在线 | 日韩| 中文字幕不卡高清视频在线| 五月综合色| 日日综合网| 狠狠色婷婷7| 九月婷婷综合网| 国产一级视频a| 色综合激情| 九九视频这里只有精品| 伊人丁香花综合影院| 日韩综合久久| 天美传媒原创在线观看| 五月丁香六月激情| 五月色天情| 中文字幕久久婷九女同| 国产精品久久久久久久久久| 激情98色婷婷五| 91亚洲免费片| 激情碰碰碰| 狠狠人妻色综合| 亚洲欧美中文字幕高清在线| 这里只有免费的精品| 人妻第九页| 色综合色五月| 91九色|疯狂|高潮|对白|| 婷婷综合干| 免费的日逼视频| 丁香五月成人| 91九色中文字幕女在线观看| 色情综合网| 五月婷婷在线综合| 开心五月婷婷婷美女| 激情综合婷婷| 中文字幕不卡+婷婷五月| 九九视频在线观看视频6| 五月婷婷色播视频| 久久九九激情五月天 | 五月丁香av在线| 97视频91| 五月婷婷xxx| 亚洲六月婷婷| 激情丁香婷婷六月天| 激情深爱五月天| 婷婷五月天播| 麻豆亚洲精品中文字幕一麻豆| 碰97 久| 暗卫含着她的乳尖H御书屋| 狠狠狠狠狠狠草| 婷婷五月情| 婷婷丁香五月天在线| 激情丁香五月婷婷| 五月丁香狠狠爱婷婷综合| 婷婷爱爱蜜臀天天操| 九9九9无码| 久色五月| 色青五月天| 五月草影视| 婷婷情色五月| 日本九九网| 超碰com| 五月天婷婷影院| 秋霞AV美国| 九九黄色网| 香港九九六区八区99| 丁香九月婷婷| 五月丁香综合啪啪| 99九九99九九九视频精品| 任我鲁这里有精品视频| 久久久五月五丁香| www九九免费视频| 色婷婷丁香五月| 99热这里只有在线播放| 婷婷97狠狠成人网站| 人人操Av| 久久久婷婷色五月资源网| 色噜噜狠狠色综合成人网| 日韩熟女啪啪视频| 国产精品免费一级在线观看| 久久久无码精品成人A片小说| 玖玖婷婷婷丁香五月| 国产五月丁香在线| 九九色精品| 五月天啪啪| 六月米奇色综合| 国产午夜精华精华精华婷| 九九99精品视频| 99在线观看| 无码成人AAAAA毛片AI换脸| 久久久九九视频精品18| 丁香五月综合在线| 337p午夜影院| 97丁香视频| 18久久| 在线伦子99热| 色区久久| 成人网站免费sxj| 少妇人妻综合色6699| 这里只有精品免费视频| 97操操操| 亚洲激情在线| 欧美丁香五月| 五月天激情综合网站| 久久激情综合| 久久九九免费视频| 思思re99视频在线观看| 日韩黄色影院| 天堂成人久久| 亚洲视频在线观看99| 不卡影院午夜理论片| 亚洲这里只有精品| 婷婷五月天激情网| 99精品久久久久久久久| 99热日韩| 激情九九这里只有精品| 97干欧美| 黃色三级三级三级三级 qixing300.shrkbk.com www.jinbozs.com tianmiaosw.com | 精品无码色| www,婷婷五月天777me,com| 丁香久久| 99热成人| 婷婷久久18| wwwss在线观看| 丁香五月天激情AV| 97碰碰在线看视频免费| 91久久久久久| 国产日韩av片| 色五月婷婷丁香婷婷| 五月婷亚洲精品| 久久婷婷精品| 草榴视频黄色网| 超碰91av| 色五XX| 日本一道久久| 超碰免费电影| 老司机午夜福利视频金瓶梅| 天天日天天色| www.色婷婷| 日本久久人| 亚洲天天免费| 天堂久久婷婷| 色综色网| 日本女天天爽| 五月天激情国产综合婷婷婷| 国产高清视频色拍| 天天色天天射天天日| 久久五月婷天天干| 99网| www.henhenl| 亚洲AAAA网| 噜噜噜狠狠色综| 天天干天天av天天射| 激情五月天色色| 激情五月色在线播放| 五月婷婷六月丁香| 99资源在线| 色五月天中文字幕| 日韩操人| 97五月婷婷| 伦99热| 久久婷婷91| 日韩熟女啪啪视频| 色婷婷丁香五月在线| 成人在线综合| 色婷婷无吗| 99色看这里只有精品| 操日视频| 久久久久久久久久婷婷| 婷婷五月天a| 深爱五月激情| 亚洲AV第二区国产精品| 婷婷五月花西瓜| 免费看欧美成人A片无码| 激情九月天天天天婷婷| 五月天婷婷丁香六月| 丁香在线视频| 91热99| 五月婷婷五月色| 香蕉婷婷五月| 婷婷综合成人五月天| 色婷婷狠狠18禁| 婷婷久久图片| 激情五月,婷婷五月,丁香五月| 中文字幕有多少字| 热99这里只是精品| 女婷久久| 久久色五月| 丁香五月成人社区| www.99.色| 六月婷婷狠狠色在线观看| 97操操| 夜夜躁婷婷AV| www.婷婷六月天| 99热黄| 九九热短视频在线观看| 一区二区视频在线观看高清视频在线 | 欧美精品999| 久久视频婷婷| 五月天伊人久久久久| 丁香美女主播视频在线观看| 日韩限制级大尺度黑料泄密大尺度视频一区二区在线观看 | 91啦丨九色丨刺激中文| 久色资源网| www.wuyuetian啪啪| 婷婷五月丁香在线观看| 色一情一乱一伦一区二区三区| 99色天堂| 亚洲热综合| 超碰九九热| 91九色欧美| 色99无码| 五月天丁香综合久久国产| 97操| www.婷婷五月天| 毛片蕉地一二| 五月婷婷激情| 成人网站免费在线播放| 亚洲成人一区| 伊人网欧美在线男人天堂五月丁香| 97色97干| 亚洲成人网站在线观看| www五月| 亚洲精品va| 丁香五月天激情综合| 99精品在线观看| 色婷婷基地| 久热无码| 国产精品国产成人国产三级| 丁香五月天殴美激情| 欧美一区二区VA毛片视频| 色亭亭五月天网扯| 天堂久久久久天堂网| 久热这里只有精品在线| 九久热| 五月天四色房丁香亭亭| 国产精品视频| 色色性爱视频| 六月色狠狠色| 欧美精品狠狠色丁香婷婷| 婷婷丁香五月综合网上| 丁香五月婷婷综合精品素人| 中文字幕av在线| www.色五月| 疯狂做受XXXX高潮A片| 思思99精品视频在线观看| 国内精品不卡一区二区三区| 亚洲色综久久五月| 99热 在线播放| 丁香网站| 国产精品久久99| 成人视频网| 婷婷五月色丁香在线看| 97人人操人| 97色欧美| 玖玖伦理电影| 91操黄| 久久天天| 亚洲国产婷婷色五月| 国产毛片精品一区二区色欲黄A片| 五月丁香啪啪激情| 二区成人视频| 五月婷婷AV| www.狠狠狠狠| 青青草原爱爱网| 天天综合网91| 丁香五月网| 久9热插入| 久久久91| 色青青视频| 五月婷婷之综合激情在线| 国产色网站| 激情五月综合视频| 国产探花一片区| a在线观看| 亚洲第精品| 久久图色4| 色久综合| 九九视频在线| WWW.五月天9999| 五月丁香婷婷激情爱爱| 久久视频这里有精品99| 十月丁香九月婷婷综合| 色婷婷影院| 婷婷丁香18| 丁香婷婷色情| 麻豆123区| 婷婷丁香亚洲色综合91| 99久久精品免费精品国产_国产精品久久久久久_国产在线|日韩_久久国产精品电影 | 人人色人人弄人人操| 激情综合网激情五月天| 日本精品。999| 人人操91色| www色五月| 久久A V无码视频| 激情五月天天| 久久久激情| 亚洲人妻五月丁香婷婷| 色啪影院| 激情五月婷婷她| 国产成人精品一区二三区熟女在线 | 狠狠插狠狠插| 婷婷亚洲五月丁香综合在线| 超碰日日操| 碰97 久| 久久精品4| 亚洲另类久久| 久久亚洲A| 婷婷伊人视婷婷婷| 亚洲欧美一级久久精品| 久久婷丁香五月| 五月综合影院| 天天拍夜夜撸| 91狠狠色色丁香婷婷综合久久| 婷婷精品| 五月丁香成人网| www.夜夜操| 久热这里只有精品66| 婷婷伊人网| 色九九一二| 亚洲在线中文字幕2| 噜噜干日本| 五月婷婷婷| 色亚洲婷婷| 久久这里只有精品视频15| 色五月天在线观看| 日本婷婷在线| 色婷婷成人| 色婷婷综合五月| 成人在线视频网| 丁香五月婷婷欧美成人色图| 婷婷色色亚洲| 丰满少妇猛烈A片免费看观看| 五月丁香六月婷婷久久肏| 日韩操逼小电影| 亚洲精品操一操、噜一噜、摸一摸、爽| 色九月婷婷丁香| 蜜臀av 粉嫩av 懂色av| 97久久视频| 色色色色色网| 久久激情网| 狠狠干在线| 五月停停激情网| 97干婷婷五月天| 五月丁香婷婷爱激情综合网| 综合婷婷久久| 狠狠狠狠狠狠色| 秋霞少妇毛片| 欧美色偷偷大香| 91操人人操| 日本精品人妻无码77777| 色婷操逼| 五月丁香婷婷久久| 九九99免费视频| 九九这里是免费的视频5| 亚洲中文丁香| 99热欧美在线观看| 色亚洲无码| 色色色国产| 色狠狠综合网| 91超碰在线播放| 丁香五月网| 男人天堂AV在线一区二区| 蜜乳AV成人| 狠狠久久婷五月综合色| 五月婷婷影视| www.色欲丁香婷婷| 另类图片五月天激情| 日韩一级| 色九月丁香婷婷蜜桃在线观看| 婷婷色五月91啪啪| 97伦乱| 丁香五月婷婷社区| 九色99视频| Aaa久久| 久久视9精| 色色色com| 婷婷碰碰| 亚洲乱啪| 五月天天综合| 婷婷久久五月| 色99婷婷五月天| 色涩影院六月丁香| 国产免费一区二区三州老师F1F1| 丁香狠狠色婷婷| 99网址在线看| 人妻狠狠操| 婷婷久久五月| wwccc久久久| 狠狠操在线视频| 九九色热视频| 五月丁香综合网| 丁香花在线高清完整版视频| 91丨九色丨白浆秘| 热久精品| 日本在线看片免费视频| 久久久久久久91| 中文字幕久久婷九女同| 日熟女| 久久婷婷亚洲| 91精品久久久久久| 丁香九月综合| 色婷精品91| 26UUU欧美| 久99视频| 婷婷激情久久| wwxx日本| 99热精品99| 久久99免费视屏| 五月综合在线婷婷图片| 久久五月婷天天干| 久久婷婷激情视频| 五月婷婷色五月| 99热九九九九| 超碰精品在线| VfJxEwPH| 亚洲第一黄网| 色婷婷久久| 色九区| 九九色大香蕉| 狠狠综合网| 99re热视频这里只有综合亚洲| 久久视频这里有精品99| 亚洲成人AV高清字幕| 综合欧美五月婷婷| 另类综合国产| 99久久99九九99九九九| 色婷丁香91| 香蕉综合网| 天天舔天天操| 婷婷精品| 激情婷婷内射| 五月婷婷深深爱| 亚洲激情综合| 久热久| www.久久| 婷婷色网| 噜噜色五月| www.婷婷| 夜夜资源站| 五月之婷婷| 99热这里只有精品3| 性爱网六月丁香| 五月丁香激情综合欧美| 丁香六月激情综合| 丁香五月婷婷天堂大香蕉| 天天影视色综合网| 国产黄色免费在线观看| 亚欧州精品视频| 色五月天丁香婷婷| 色色五月丁香婷婷| 再次出发二| 色播婷婷五月天| 99re在线播放| 激情五月婷婷| 天天色中文字幕女优AV| AAA久久久| 色五月丁香六月婷婷| 亚洲激情AV| 色综合大香蕉| 五月天久久色| 精品五月天| 久久这里在精品视频| 97热在线精品| 操人精品| WWW.开心五月天.COM| 成人精品视频99在线观看免费| 久久午夜理论| 五月婷婷丁香日韩在线| 五月天久久婷婷| 丁香 婷婷 激情 综合 五月| 色亚洲色宗合| 亚洲综合激情五月久久| 黄色五月婷婷| 五月天激情国产综合婷婷| 91天天操天天干天天射| 99热9| 深爱女色婷婷丁香五月亚洲图区| 天天插综合| 久久九九玖玖| 91久久婷婷人人澡草| 九九这里有精品| 五月丁香六月激情在线| 色九九中文字幕| 97碰超级人人看| 亚洲色色爱| 九九热在线视频| 九九精品婷| 婷婷综合在线| 六月色播| 久久在线视频免费观看| 色色婷婷综合网| 淫五月停停| 丁香五月婷婷88在线| 久久激情五月网| 国产毛片精品一区二区色欲黄A片| 91碰视频| 日韩成人av在线| 玖玖九九99| 91亚洲免费片| 国产精品美女久久久久AV超清| 丁香六月啪啪| 97超级碰| 开心五月婷婷在线| 日日躁夜夜躁狠狠久久AV| 五月婷婷六月丁香| 五月丁香成人| 亚洲AV第二区国产精品| 超碰v| 1024在线观看免费视频| 久久aaaa片一区二区| 欧美一区二区激情视频| 综合激情五月丁香9999久久精| 五月丁香黄色视频| 婷婷久热| 婷婷综合激情| 欧美操人| 欧美激情综合| jiujiu热在线视频| 超碰在线国产| 91啪啪视频| 亚洲av成人在线| 五月婷中文字幕| 婷婷五月综激情| 丁香久久五月婷综合| 大地资源中文在线观看免费| 在线看av| 综合网啪| 在线观看免费狠狠色丁香香综合| 丁香网站| 狠狠干综合网| 婷婷五月天激情小说| av色婷婷| 99热在这里只有精品| 国产激情久久久| 青青草五月天| 五月天三级| 中文字幕在线观看视频www| 艹| 97色精品视频| 激情文学五月丁香六月婷婷| 狠干综合| 婷婷久久丁香五月| 五月开心婷婷网| 欧美69久成人做爰视频| 丁香五月天人体| 国产 码在线成人网站| 99色 色| 东京热人妻一区二区三区在线| 欧美色性色好| 亚洲一级色电影| 丁香六月婷婷色XXXXX| 丁香六月婷婷五月天| 老师的粉嫩小又紧水又多A片视频| 婷婷在线操| 色色无码| 九九这里有精品| 91超碰在线播放| 九九热最新视频| 婷婷综合五月激情| 亚洲AV成人在线观看| 色五月婷婷在线观看| 91九色小视频| 五月天婷婷成人网| 婷婷精品综合| 色婷婷色99国产综合精品| 人人舔人人色人人高潮| 成人龟情网丁香五月| 色色色色综合| 欧洲毛片基地c区| 国产古装妇女野外A片| 色婷婷亚洲在线| 亚洲五月天色色| 大香蕉久久| 97干婷婷五月天| 人人草碰| 色色色9| 精品成人无码A片观看香草视频| 91fuliwang| 99在线视频资源| 久久这有这里精品| 91免费试看| 九九AV在线| 丁香婷婷六月天| 久草嫩草在线观看| 九九色综合| 天天爽天天透天天爱| 五月婷婷九九久久| 婷婷色色网| 热的无码综合视频| 九九色大香蕉| 污污内射久久一区二区欧美日韩| 丁香成人视频| 久操人妻| 丁香五月之久操视频| 老妇槡BBBB槡BBBB槡| 梁铮版《蜘蛛女侠》在线| 欧美一级毛卡片无码| 五月婷婷与六月丁香图片激情| 婷婷区日本| 婷婷久久图片| 色135综合网| 国产在这里只有精品| 五月天激情国产综合婷婷婷就去爱| 69凹凸成人综合网| 五月丁香av中文| 青青草婷婷综合五月| 九艹在线| 日韩限制级大尺度黑料泄密大尺度视频一区二区在线观看 | 激情碰碰碰| 思思久久99| 99久久玖玖| 亚洲婷婷在线播放十月| 五月丁香亭亭A片| 79精品视频在线观看,| 99热这里只有精品在线播放| 91久久久久久| 五月婷久草| 超碰v| 四虎影在永久在线观看| 久久机热这里只有| 五月色色网| 操日本99| 这里只有精品久久| 天堂中文8资源在线8| 99热首页在线30| 51成人| 婷色综合| 亚洲精品无AMM毛片| 婷婷五月天丁香社区| 蜜乳国产网站| www,五月天com| 一区二区三区XXXXXX| 五月综合色| 综合久久99| 五月丁香婷婷视频| 久色国产| 五月天激情网图片 - 百度| 久久大香蕉视频| 啪啪日热| 久久视频在线视频| 国产成人网站在线观看| 五月天激情www| 五月天欧美 另类小说| 99激情在线| 五月婷婷综合性爱噜噜| 亚洲综合五月天婷婷| 色五月激情五月| 婷婷久久99| 色婷婷婷婷| 欧美婷婷五月天综合| 丁香五月激情天AV无码| 亚洲网站999| 蜜乳AV成人| AV九九| JAPANRCEP老熟妇乱子伦视频| 久婷五月| 天天综合 99久久婷婷| 色婷婷久综合久久一本国产AV| 五月婷婷丁香大陆免费| 狠狠干五月天婷婷网| 99久久精品国产色欲| 婷婷五月激情综合网| 婷婷丁香五月综合网| 强辱丰满人妻HD中文字幕| 另类小说五月天| 99九九99九九九视频精彩| 亚洲色优| 五月天五月天激情网| 天天摸日日舔狠狠添婷婷婷 | 狠狠摸狠狠摸| 婷婷五月中文在线视频| 开心五月婷| 中文字幕日韩无码制服诱或| 深爱五月综合网| 色VA| 最新日本A片| 激情五月丁香五月| 亚洲精品影视| 中文精品在| 久草五月天| av无码电影| www综合久久| 久人人操| 一区三区视频有限公司| 五月天色色色色色| 人人叉久| 久久婷婷亚洲无码一起| 婷婷色六月| 热九九九九| 97在线干| 《久久综合九色综合97婷婷| 中文网婷婷字幕婷| 久操人| 玖玖婷婷视频| 98永久精品| 久久九九@| 99日本黄站| 97在线精品| 天天性视频| 久久精品爱爱| 二人电影免费版在线观看| 成人必爱视| 色婷婷成人影片| 丁香六月爱综合| 欧美亚洲操逼| 丁香六月婷婷综合在线| 亚洲99精品欧美一区| 开心激情五月天网| 丁香婷五月天开心六月| 欧美日比视频| 亚洲色啪| 熟女人妻一区二区三区免费看| 久久精品A片777777| 亚洲精品久久区二区三区蜜桃臀| 丝袜大香蕉| 99视频综合| 五月婷婷9| 国产三级片91| 成人日韩欧美| 婷婷六月婷婷| 激情五月天免费视频| 国产精品五月天婷婷| 可以看的av网站| 99riAV国产精品视频| 丁香五月婷婷基地| 亚洲V国产V欧美V久久久久久| 婷婷综合在线| 丁香社92视频| 成人综合AV| 五月丁香六月婷婷亚洲天堂网站| 色色99色色| 综合六月激情婷婷| 玖玖婷婷五月天| 五月天堂婷婷| 性一交一乱一交A片久| 五月丁香婷婷五月色| 性色综合网| 婷婷成人综合| 六月五月久久丁香| 亚洲成人在线五月天| 先锋资源91| 97在线观看| 九久久九精品视频| 特级操b片| 丁香六月 婷婷六月| 五月婷婷狠狠干| 文中字幕一区二区三区视频播放| 成人在线视频网| 一区二区视频在线观看高清视频在线| 波多婷婷久久| 91九色无码日韩 | 九九在线精点品| 亚洲精品亚洲人成人网| 国产精品久久久久久福利| 激情婷婷五月社区| 在线中文av| 天天舔天天插天天干| 九九热精品| 国产成人精品一区二三区熟女在线 | 17.c黄色| 狠狠综合久久| 五月婷婷很很色| a九九热www| 五月婷婷久久综合| 夜夜爽天天爽| 国产美女无遮挡裸体毛片A片| 68热超碰在线| 中文字幕在线播放视频| 开心五月丁香婷婷| 成人在线视频一区| 亚洲精品久久久久久久蜜桃| 激情婷婷综合网| 人人爽在线视频综合网| 久久偷拍综合五月天| 欧美色婷婷| 久久99大| 色色婷婷五月| 激情五月天色婷婷| 日韩成人精品中文字幕| 久久九九激情五月天 | 久久成人亚洲欧美电影| 91精品久久久久久77777| m色激情网| 亚洲中文字幕AV| 香蕉曰比| 丁香婷婷人妻| 99在线观看精品视频| 韩国真做片在线观看| 丁香五月大香蕉AV| 激情网站综合五月天| 婷婷成人视频| 国产一级片| 色色激情网| 色婷婷激情五月天| 99久久这里只有精品| 成人免费网站免费看| 99re久热只有精品6在线直播| 可以免费观看的AV| 色色色综合网| 久久之人妻| 2025天天日爽| 国产黄色在线观看| 欧美色图45678| 亚洲五月婷婷| 午夜天天精品视频| 丁香综合婷婷开心激情网| 婷婷久久丁香| 99热网精品| 天搞天天天天天| 五月婷婷六月激情| 激情性爱五月天网页| 九九热只有这里精品| 五月丁香啪啪啪| 久久大大香| 夜夜躁狠狠 | 丁香婷婷久久五月天| 蜘蛛女免费观看完整版高清电影| 五月婷婷偷拍| 性爱五月婷| 五月丁香婷婷啪啪综合网| 婷婷色五月丁香六月欧美啪| 91丁香婷婷综合资源| site:ornaments52.com| 中文中文在线| 亚洲综合婷婷五月| 五月丁香六月激情视频| www.91av.com| 五月天婷婷在线观看精品男人| 欧洲亚洲免费视频9| 六月丁香婷婷综合影院| 天天色天天爱天天爽| 国产精品第一国产精品| 久久久久久激情| 激情六月天| 97操女视频| 色综合网综合| 国产午夜精品久久久久九九| 色亚洲无码| www色五月| 婷婷五月中文字幕| 五月婷婷丁香俺日污视频| 丁香五月婷婷国产av| 五月天色官网| 国产AV国片偷人妻麻豆| 欧美在线视频99| 丁香蜜臀黄色婷婷五月天| 色婷婷久久视屏| 天天做天天爱天天要| 综合久久激情久久| 五月婷婷co.m| 99久久国产宗和精品1上映| 99超级碰免费视频| 玖玖爱综合网| 色99自拍| 超碰在线综合| 婷婷五月丁香香蕉| 无码操B| 一区操| 亚洲va欧洲va国产va不卡| 五月婷婷综合成人| 亚洲人妻五月丁香婷婷| 天天日色情| 五月丁香六月香综合激情| 影音先锋美国A| 69er小视频| www久久久久久久久久久| 激情WWW| 丁香婷婷色五月| 噜噜噜色噜噜| 4438亚洲欧美| 五月丁香五月天现场视频| www.夜夜| 国产精品久久久60086| 一级AV片| 深爱激情网综合| 狠狠色婷婷综合开心影视| 狠狠插日日干撸| 91男人资源站| 久久开心五月天激情| 婷婷六月丁综合| 这里只有精彩视频| 丁香五月九九| 丁香花网站| 99热这里都是精品| 99精品性爱| 秋霞午夜理论| 五月激情啪啪| 五月激情婷婷开心| 婷婷五月欧美AA片免费| 色五月婷婷基地| 久久九九中文字幕| 五月婷婷无码| 婷婷六月色丁香视频在线观看| 午夜人妻熟女一区二区| 婷婷丁香基地在线| 日韩三十六页| 99视频精品在线| 欧美日韩国产一区| 成人AV在线电影| 激情五月开心五月在线视频| 国产精产国品一二三在观看| 婷婷开心激情综合五月天| 色情婷婷久久五月天| 久婷五月| 九九热超碰| 欧美午夜精品一区二区三区电影| 26UUU精品一区二区c〇m| 大香人妻| 色六月婷婷| 丁香丁香激情网| 97超碰婷婷五月天| 能直接看的av网站| 久久精品99久久久久久| 成人丁香五月| hd五月婷婷在线| 91九色成人原创视频| 激情四射婷婷| site:wpjngj.com| 婷婷五月丁香综合网| 久久人妻精品| 久久精彩综合视频| 激情图片亚洲| 婷婷五月小说| 婷五月天天| 婷婷五月色播天| 婷婷成人五月天成人文学| 亚洲av综合网| 亚洲欧美中文字幕高清在线 | 插插插丁香五月婷婷| 九九婷婷五月天| 99啪啪网| 丁香五月婷婷呀| 狠狠色婷婷色| 色色五月婷婷| 丁香五月色情| 五月丁香黄色| 色狠狠色噜噜AV天堂五区| 色婷婷五月天视频在线| 97色片| 成人短视频在线观看| 久色五月丁香视频| 婷婷D区| 丁香五月影院| 亚州激情在线视频| 五月黄色婷婷| 综合五月婷婷| 日操夜撸| 五月丁香六月婷综合成人综合| 色色99| 成人免费高清在线播放| 亚洲视频丁香网va| 涩 五月 婷婷 狠狠| 能看的av| 婷婷五月六月丁香| www.粉嫩av.com| 日韩小视频在线99| 99精品在线观看| 亚洲 六月 综合| 午夜一区| 中文字幕av久久爽| 久久综合五月| 综合婷婷| 亚洲天堂玖玖| 双性美人被调教到喷水A片| 日韩无码色色| 青青夜夜狠狠夜夜狠狠| 六月丁香成人| 国产中的精品AV一区二区| 在线成人视频免费| 99热这里只有精品50| 99热这里只有精品1025| 激情综合网激情五月俺也去| av大香蕉| 色色色综合色| 六月婷婷狠狠| 182TV亚洲| 亚洲激情四谢| 久久精品人妻| 午夜丁香综合婷婷| 欧美综合五月丁香五月天| 日韩成人av在线| 91综合网| 亚洲精品一区二区另类图片| 中文字幕视频在线播放| 久狠日av| 日本激情ⅩXX免费视频| 秋霞AV美国| 在线观看视频1区| 裸睡玩奶头(高H)| 五月婷婷成人| 久久这里有精品视频在线免费观看| 激情婷婷丁香五月天小说| 丁香玖玖视频大全| 99久久精品免费精品国产_国产精品久久久久久_国产在线|日韩_久久国产精品电影 | 久色大| 伊人狠狠操| 婷婷激情五月天网站| 偷偷操99| 五月丁香 狠狠爱| 嫩草AV久久伊人妇女超级A| 五月丁香成人| 深爱激情综合| 夜丁香五月婷婷| 开心婷婷五月天电影院| 午夜成人AV在线| 狠狠爱婷婷色| 黄色av网站在线免费播放| 中文字幕免费高清电视剧| 欧美丁香五月97色| 久久精品性爱| 色六月视频| 激情五月天啪啪| 五月开心婷婷极品激情| 久Se视频在线观看| 国内9l视频自拍老熟女九色| 日本中文在线| 荫道BBWBBB高潮潮喷| 色五月天激情| 天堂在线中文| 夜夜骑天天操| 国产VA亚洲VA96| 六月婷色六月| 五月婷婷色丁香| 亚洲夜五月| 99热自拍| 五月婷婷黄色| 精品网站:999WWW| 超色欲天天| www亚洲无码| 色亭亭丁香五月天| 亚洲激情四射| 青青青在线视频人视频在线| 国产精品VIDEOSSEX久久发布| 欧美日朝成人| 婷婷的久久网站| 午夜爱爱网站| 成人五月网| 丁香激情网| 五月天婷婷基地| 国产欧洲欧洲精品久久| 成人五月天视频播放| 狠狠干伊人| 五月丁香欧美在线| 爱婷婷久久视频| 亚洲性爱日韩无码| 人妻肉射免费观看| 99热综合在线观看| 丁香伊人综合| 丁香五月婷婷88在线| 丁香伊人综合| 五月天激情日色在线| 思思热在线视频99| 五月丁香婷婷中文网| 五月婷婷欧美激情|